How to build a wooden fence

If you are looking to build a new fence fast on your own, you should stop and research more about every step you need to go through to make it perfect. The work can be exhausting, so if you have a good budget you can hire a company to do it for you. For those who like to work on their own, these steps will help out to make a reliable wooden fence for your backyard.

There are many types you can choose from. For more complex fences, with cut out details or combination with steel or other materials, you will need more advanced technology meant for making a fence. We are going to cover classical shadowbox fence. This type of fence is traditional for ordinary family houses. It gives a little bit of privacy and security. Wood fencing can be the right choice for you, contacting the right company will help you out a lot.

Step 1: Preparation

It depends on the area where you live, what are the regulations for building something in your backyard. There are many neighbors that want to complain when something isn’t as it should be. You need to mark your property line before building, so everything can be according to law. There were many situations where neighbors sue each other for crossing the property line. Also, you need to call your utility company and have them lay out all of your underground lines.

Before any digging, you should get a string and pull across the yard where you want your fence to be placed. On the end of the string, you can place a wooden stick in the ground and tie the string, so it will be tightened. Also, a good advice is to place the string six inches from the property line.

Step 2: Posts

After finishing with marking the fence area, next step is to mark the post holes. No matter if the land is steep, you should follow the straight line. When you are setting your stake, make sure to place it half width of the post from the string, so it will fit correctly later. Usually, post spacing is around six to eight feet.

You can remove the string where you marked the post holes to make it easier to dig. When you are setting your posts, make sure they are just below the frost line, and your holes should be three times the thickness of your posts. You can use a marking paint where your post is going to be placed, so you can remove the stake. There are many tools for digging a hole. A power auger is perfect for the job. Usually, people don’t own a power auger, but they can be rented or borrowed from a friend is he owns it.

Next step is to put about six inches of dry concrete at the bottom of the hole, set the post in the hole, and make sure it is standing straight. For extra support add braces. After mixing the concrete, fill the hole to couple of inches above ground level. The same thing is repeated for every post.

Step 3: Rail

The rail for the posts should be five to six inches above the ground, and from the top of the post. If the ground is steep, your rail should follow the ground line. Also, the middle rail needs to be placed according to measures. It is smart to cut off more then you need because it is easier later to cut the extra length. For adding a gate you will need to do some more research. Read more here: https://www.wikihow.com/Make-a-Fence-Gate

Step 4: Plates placement

The last part of fence building is adding the plates on the rails. If you are looking to mark every plate that is going to be placed, you are going to waste your time. You can add the first and the last plate in the row and put a nail in the top of them. Tie a string from one to the other nail so you can have a straight line to assure plates are equally placed.

Use a two-by-four spacer to measure the distance between the plates. Follow the string line and repeat the procedure to the end of the row. Plates are also going to be placed on the backside of the rail, so there will be less space between. This means more privacy. The same process is for the backside.

Making your own fence for the first time can go the wrong way, but with a detailed tutorial, everyone can manage to do it. It will take some time to be made, depending on the speed and time invested.